Fort Construction: Da Chunk

 

One of the main reasons that I decided to build my fort with modular walls (apart from much easier storage and transport) was so that I could swap out standard, straight sections with alternative ones. This meant I could make diagonal or curved walls, two-story towers, or whatever else I thought might be cool and Orky. For the basic fort, I had originally planned to have two kinds of special sections, both suited for my gang's fort at the far end of the Skid—one corner piece that jutted up against a large chunk of the 'Ulk and some sections where the walls of the fort butted up against solid rock walls. I ended up not having time to do the rocky outcroppings in this batch, so I focused my attention on the chunk.

The chunk is made from a large Nerf gun and a couple smaller water pistols I picked up at a thrift store. Apparently I completely forgot that I own a Dremel while I was building this thing, because most of the work was disassembling all the broken toys. 

There were some advantages to doing it the slow way. Taking out the screws on the Nerf gun and other toys with more complex mechanism allowed me to get at some of the sub-assemblies without damaging them. On the other hand, cheap water pistols made from hard plastic welded together are a huge pain. I mostly tore them apart with wire cutters, and they tended to shatter into sharp plastic shards. It made for some appropriately damaged wreckage, but probably wasn't worth all the stabbing I got during disassembly.

There is a small foam wall section stuck to the back of the chunk so that it connects with the rest of the walls and models on the walkways can still pass by. There's also a bit of internal structure built out of plastic bottles to make sure that all the broken toys stay stuck together. I filled this interior structure with expanding foam, so everything is pretty solid at this point.

I filed a few grooves into some of the more pristine bits of Nerf gun to make it look appropriately worn and damaged. I also filled some of the small holes in the construction with some dangling green stuff cables. It looks pretty decent with just a basecoat, so hopefully it will look even more like a huge chunk of space debris once it gets a proper paint job.

Fort Construction: Outer Walls

 

Work continues on the fort for my Morker boyz. Yesterday I spent some time working on the outer walls of the fort. The fort walls are made out of flame pro-tardant polymascotfoamalate with medium-weight chipboard used for cladding and armor panels. Chipboard works well in this case because many glues will melt foamulon, which can make it difficult to add details to the surface. PVA glue is still safe, though, and chipboard sucks up PVA really well, making a pretty decent bond. Chipboard also has a lot of downsides, such as warping when it gets wet and leaving soft, frayed edges when you cut it. I ended up transitioning to using mostly plasticard as the project went on and even went back and replaced a bunch of the chipboard in some places. Smooth plasticard surfaces don't bond quite as well with PVA, though, so I had to stick it on with two-part epoxy in some places, which was a lot more work.

Since the walls were a bit top-heavy to begin with and would have fragile and relatively heavy miniatures balanced on top of them, I stuck some lead fishing weights in the base of each wall section to keep them from tipping over.

One of the criticisms I got about my walls early on is that despite the abundance of chains in much of the Gorkamorka artwork, having chains on my fort made it look more like a Slaaneshi dungeon than an ork fort. Naturally, I immediately reconsidered this aesthetic choice and instead...just kidding. I added even more chains.

My general goal was to make it look a bit like the remnants of old machinery that broke down and was just kind of left in place. I might add some dangling cables or broken rails as well. Still, it's coming along slowly.

Building Da Fort

It's been a few months since I posted anything here, due to the fact that my town has been hit not just by the global plague that is currently rampaging largely unhindered through my country, but also by earthquakes, food shortages, and whatever the desert equivalent of a class 3 hurricane is. Fortunately, we're still alive and doing pretty well, all things considered. And although I haven't had a ton of free time between work, repairing the house after disasters, and staring blankly into the void, I have made some progress on a proper fort for my Morker boyz.

I actually started this fort over a year ago and the planning began long before that. Since my gang was the most obsessed with vehicles and gubbinz of any in our campaign, I wanted them to be based out of a remote fort on the far side of the Skid, where the the grots are unruly and the spanner boyz are even more eccentric than usual. I designed their fort to be built up against the side of an especially large chunk of the 'Ulk that had long since been stripped of any useful scrap. I also wanted to make the fort modular so that the other gangs could use the parts and swap in their own sections to make their own custom forts.

Like most of the gubbinz for my big trakk, my plan was to hold everything together with magnets. Since there were going to be models standing on top of the walls, I wanted to make sure that the whole thing didn't tip over if someone bumped the table. It also had to fit the dimensions for the fort scenarios and be tall enough that all the vehicles in the campaign could fit through the gate. Fortunately, my mob has the most ridiculously tall vehicles in the campaign, so hopefully this will accommodate everyone.

The project has changed quite a bit as the build has progressed, and there's still quite a way to go until it's ready to go on the table, but I'm pretty happy about the direction in which things are going.

All the Henchmen

I finally managed to get the last of my Verminkin finished up.  This last guy is armed with a push knife and a throwing knife.  Of course, only Heroes get to use throwing knives in Mordheim, so it will just count as a sling.  It was considerably easier to convert than the slings were, so I might make do this again when I need more Verminkin (which hopefully won't be for a while.

The idea for this guy came from the original Mordheim night runners, which featured a number of arms holding throwing knives and shuriken.

As I recall, the knife is a Space Marine knife that I just whittled down to the proper size.  The blades on the push knife are from a Dark Eldar spear of some sort, as I recall.  It's surprisingly hard to find good symmetrical blades in Warhammer, but this one worked quite nicely.  As with my other Verminkin, the body is just a Clanrat with a green stuff cloak.

So at long last, my Verminkin are complete, which should give me enough models for a decent starting warband.  Now I just need to work on some Terrain and we'll be ready to go.

Almost There...

Here's another Verminkin for the horde.  I tried just giving this one two swords, though doing so with the Clanrat shield arm made for a pretty awkward pose.

Yeah, punch daggers definitely work better than full on swords.

One more to go...

Slinger 2: Sling Harder

Here is Verminkin number three.  He's basically the same as the last one, but with a bigger stabber.

You can't really tell, but this guy's actually got slightly lighter colored fur from the other Verminkin. I also like the way his leather helmet turned out.

The sling used the same method as the other one, which, again, was a huge pain, so this guy might be my last slinger for a while.  His sword is made from the end of one of the left over spear tips I had after making the slings.

Definitely have to figure out an easier way to make slings...

Skaven Slinger

The second henchman is now finished.  I decided to give this guy a sling, since having a whole unit of Verminkin flinging rocks can be pretty handy.  Back in the day, Games-Workshop used to sell sling arms for upgrading your models.  After modeling a few myself, I wish that I'd invested in a few of them. 

The sling turned out pretty well, though it's a bit on the large side.  I was mostly concerned with making it solid.

The sling arm is a Clanrat spear arm.  I actually left some of the shaft, which runs inside the sling, giving it some structure so that it's not just two thin strips of green stuff sticking up in the air.  It's solid enough that I can grab the model by the sling without worrying, so I guess it paid off.  Still, not doing a whole unit of these unless I come up with a better method (or track down some of those old GW sling arms).