Fort Construction: Workshop

 

Another big section of the fort is finished. This one is the spanners' workbench and tools, including some nice hydraulic arms. I probably went a bit overboard with the cables and the ductwork, but since the workbench itself was so detailed, I wanted the rest of the room to look like it matched.

As you can probably tell, most of this wall section is just built from the Mekboy Workshop terrain set, though it did take a bit of work to take the freestanding workshop and build it into the existing wall of the fort.

The biggest part was flipping the main wall of the workshop around and installing the bench on the wrong side. I decided to make the more detailed side of the piece face forward, since the other side would be glued to the wall. The piece is fairly symmetrical, so I really only had to carve some holes for a couple of wires and pipes to get the bench to sit (mostly) flush with the wall.

I ended up grinding off the back half of the wall to better attach it to the fort, so the workbench is now at a slightly odd angle. Plenty Orky, though.

Nice to see that the Orks keep their workspace as tidy as I keep mine.

Since the Mekboy Workshop came with a big hydraulic arm and I already had another as part of the gubbinz for my big trakk, I wanted to make some spots around the workshop where the arms could be installed. I went a little overboard making the mount for the arm, adding as many motors, compressors, and gears as I could fit into the tiny space I'd allotted myself. Though I guess going overboard is kind of on par with the rest of the workshop.

I was originally going to mount the second arm on the floor right next to the workbench, but that didn't give me much space if I wanted to make sure that this piece still fit together nicely with the other fort walls. Also, there was already more than enough detail crammed in this little section, so it couldn't hurt to spread it out a little bit.

I ended up making a little freestanding platform for the arm to sit in. I modeled it mostly on the assembly line platforms you see in car manufacturing plants, which seemed appropriate. I also had to pack more lead weights into this little thing than any other part of the fort just to keep it from tipping over when the arm swung around. Turned out pretty well, though.

Only a few more sections and this thing will be ready for some paint.